FORCED AIR HEATERS

CoverSearch		CoverSearch \| Dana Point, CA 92629
CoverSearch		(877) 687-5687 \| Fax (949) 606-7193

FORCED AIR HEATERS

NOTE: All Heater Prices listed on this page include total price with Shipping!

Propane

Model SPC-35
(35,000 BTU/HR) Forced Air Heater $210.00 Economy model-low-cost-high heat output. Keeps shops and garages of up to 6,000 cu.

ft. comfortable in the coldest of weather. Push button piezoelectric ignition standard. Lightweight, and compact and operates for hours from a standard 20 lb propane tank. Aluminized steel finish . Certification pending.

Model SPC-85
(Adjustable 50,000 to 85,000 BTU/HR) Forced Air Heater $276.00

Features continuous electronic ignition and adjustable heat out-put from 50,000 to 85,000 BTU/HR for buildings from 9,000 to 16,000 cu. ft. High output fan for better circulation of heated air. Automatic electronic ignition will not take place unless heater is plugged in. Propane flow stops if heater is accidentally unplugged. Can be operated for hours (at low setting) from a standard 20 lb. tank. Powder coated finish.

Model SPC-125
(75,000-125,000 BTU/HR) Forced Air Heater $291.00

Similar to the SPC-85, but with higher heating output. Adjustable from 75,000 to 125,000 BTU/HR and heats from 14,000 to 24,000 cu. ft. Automatic electronic ignition will not take place unless heater is plugged in. Can be operated for hours (at low setting) from a 40 lb. or larger propane tank. Powder coated finish.

Model SPC-170
(125,000-170,000 BTU/HR) Forced Air Heater $381.00

Adjustable from 125,000 to 170,000 BTU/HR and heats up to 4,000 sq. ft.. Heats 12 to 17 hours on a single 100lb propane tank. Thermostat maintains constant temperature. Electronic ignition. Uses 100lbs or larger tank. Shipping weight: 24.4lbs.

Kerosene

Model PK110 (shown at right) (110,000 BTU/HR) Forced Air Heater $406.00
Model PK165T (165,000 BTU/HR) Forced Air Heater $437.00 (shown below)

The All-Pro PK1110 Forced Air Kerosene heater (110,000 BTU/HR) heats up to 2,550 sq. ft. 10.5hr run time on full 9 gallon tank. Quickly heats 50' X 51' X 8' area. Built in thermostat. Lighted power switch. Fuel gauge. HSI smart start technology. Tank size: 9 gallon. Shipping weight: 55lbs.

The All Pro PK165T Forced Air Kerosene heater (165,000 BTU/HR) heats up to 3,900 sq.ft. 11hour run time on full 13.5 gallon tank. Quickly heaters 50' X 78' X 8' area. Built in thermostat. Lighted power switch. Built in fuel gauge. 10" rugged pneumatic tires. HSI smart start technology. Tank size: 13.5 gallon. Shipping Weight: 70lbs

How do I select the correct size heater?
Use the chart below:

Cubic feet of space to be heated**		Temperature Rise Required (Fahrenheit)*				BTU Capacity Required
		20 degrees	30 degrees	40 degrees	50 degrees
	5,000	14,000	20,000	27,000	34,000
	7,000	19,000	28,000	38,000	47,000
	10,000	27,000	40,000	54,000	67,000
	15,000	40,000	60,000	80,000	100,000
	20,000	54,000	80,000	107,000	133,000
	30,000	80,000	120,000	160,000	200,000
	50,000	133,000	200,000	266,000	333,000

* Temperature rise required is the difference between actual temperature and desired temp.
** To determine cubic footage: Length x Width x Height of structure.
Use this formula - Cubic Feet of Space x .133 x Heat Rise = BTU/HR required.
Note: Use this size/selection chart as a guide only since buildings vary according to type of construction, tightness and insulation.

Patio Heater

CoverSearch Toll Free 877 687-5687

e-mail covergirl@coversearch.com

CA Residents must pay Sales Tax

* Above Price includes shipping within the 48 continuous states